Articles on: Hardware

I just received my Vilo. Now what?

I just received my Vilo. Now what?


Before you install the Vilo, make sure the modem is properly installed. See here for reference:



Connecting your Vilo:

Plug in the power adapter of the Vilo to the power port.


Using a LAN cable, connect the modem from LAN port or any of the ports labeled Ethernet or LAN (depends on the type of modem), to the WAN/LAN port of the Vilo (the bottom port labeled WAN/LAN).


The LED indicator light on the Vilo will turn blue when it is ready for Wi-Fi connectivity. Connect to the Wi-Fi network using the ID and password on the bottom of the Vilo unit.


Note: It's very important to connect the modem to the WAN/LAN port and not the LAN port. Your Wi-Fi will not work if you use the LAN port.

Updated on: 12/02/2024

Was this article helpful?

Share your feedback

Cancel

Thank you!